QBN "Makers"
- Started
- Last post
- 35 Responses
- JSK0
different woods react differently to methods. I used thin layer of oak and heated a metal barel and bent it on top but it was very fragile.
I would only use plywood types on vaccum and female / male clap bending.
- JSK0
- JSK0
Book on Frank Gehry's bent wood chairs are good source to learn from.
- blaw0
The two methods of bending wood I'm most familiar with are steam bending and cold bending (layered glue up).
For steam bending, I have several articles at home. One from Wood Magazine, of which there is a complementary video available from their site:
http://www.woodmagazine.com/wood…Let me know if you need me to dig out the article.
For the cold bending approach you need to build a form and have the appropriate clamps on hand to tighten it up. Not only is this a legitimate approach, it is actually one of the best approaches. You have a lot of control over the final shape while not pissing around fire, steam, etc.
Excellent cold bending article:
http://www.popularwoodworking.co…Again, I have a ton of resources on this subject, too, so if you have specific needs, let me know.
- PonyBoy0
- saw a video on the architect on coolhunting.com or somewhere similar.. cant remember who it is damnit
applepirate - showed the whole process to that project FUCK... im sure i delicous'd it
applepirate - Crazy. I love it when the lines between architecture and art get all blurry.blaw
- i have a strong urge to go skating :)
too beautiful to skate though.pizzafire - Designer is Thomas Heatherwick. He also made a beautiful bridge in London that rolls up after you cross it.
http://www.heatherwi…Melanie
- saw a video on the architect on coolhunting.com or somewhere similar.. cant remember who it is damnit
- blaw0
Another good article here:
http://www.allwoodwork.com/artic…Someone mentioned bendable plywood, a nice description of which is here:
http://www.woodmagazine.com/mate…
- JSK0
There was pressure moldable wood from Uk while back. I cant find the link anymore but with any pressure it will bend and retain its shape.
I seen them make a perfect wooden circle ring thats 5x5 with infinite amount about length.
- tile0
Nice! cool experience and information sharing ... thanks!
- powertoni0
This place is dope:
http://techshop.ws/Im not a member, but i would be if i had any time....of course if i had time i wouldnt have any money to make shit so.....
- powertoni0
I have the street outside my apartment wired with pir sensors that tell me when the parking becomes available.
i've bought a couple of microcontrollers including the MAKE controller that you can direct with actionscript but i havent done much with it yet other than figure out how to use it.
- im open for suggestions if anybody bay area wants to work on a project.powertoni
- applepirate0
powertoni... what make controller is actionscript ready?
- powertoni0
it doesnt run flash embedded on the device...it recieves commands via ethernet or usb.
- TheFatBaron0
I've been rebuilding the 2nd floor of my house for a year now (permit/paperwork issues added probably 6 months of delays), and we're about 3/4 done (1 room entirely finished, the other just needs drywall and flooring). Reframing walls and ceilings, lighting, insulation, electrical, whatever. It's so nice to work on something big and physical. The Make stuff is awesome - it's jsut way above my level, particularly on alot of the really tiny fiddly stuff.
- applepirate0
nyc kids check this place out http://www.nycresistor.com/