ScreenPrintingHelp
ScreenPrintingHelp
Out of context: Reply #5
- Started
- Last post
- 6 Responses
- deathtoprint0
scoop coaters usually have a side to them which is a little bit sharper than the other, you'll want to use the thinner sharper edge of the scoop. The other side should be rounded or easier to tell it's not as sharp. When Coating your screen, lean it up against a wall at about a 30 degree angle, and place or drill something like a paint mixing stick (the kind they give you for free to mix the paint when you buy a gallon of it from home depot or something) or a book so it doesnt slide forward or backwards and fall while you apply pressure to it with the scoop coater. It makes things a lot easier, and with practice (yes, it takes some practice) you know you'll get the same results every time, its easier to get a more-even coat too.